Roman Amphorae: a digital resource

University of Southampton, 2005. (updated 2014) https://doi.org/10.5284/1028192. How to cite using this DOI

Digital Object Identifiers

Digital Object Identifiers (DOIs) are persistent identifiers which can be used to consistently and accurately reference digital objects and/or content. The DOIs provide a way for the ADS resources to be cited in a similar fashion to traditional scholarly materials. More information on DOIs at the ADS can be found on our help page.

Citing this DOI

The updated Crossref DOI Display guidelines recommend that DOIs should be displayed in the following format:

https://doi.org/10.5284/1028192
Sample Citation for this DOI

University of Southampton (2014) Roman Amphorae: a digital resource [data-set]. York: Archaeology Data Service [distributor] https://doi.org/10.5284/1028192

Data copyright © University of Southampton unless otherwise stated

This work is licensed under the ADS Terms of Use and Access.
Creative Commons License


Arts and Humanities Research Council (AHRC) logo

Primary contact

Dr David Williams
Dept of Archaeology
University of Southampton
Avenue Campus
Highfield
Southampton
SO17 1BJ
England
Tel: 080 593032

Send e-mail enquiry

Resource identifiers

Digital Object Identifiers

Digital Object Identifiers (DOIs) are persistent identifiers which can be used to consistently and accurately reference digital objects and/or content. The DOIs provide a way for the ADS resources to be cited in a similar fashion to traditional scholarly materials. More information on DOIs at the ADS can be found on our help page.

Citing this DOI

The updated Crossref DOI Display guidelines recommend that DOIs should be displayed in the following format:

https://doi.org/10.5284/1028192
Sample Citation for this DOI

University of Southampton (2014) Roman Amphorae: a digital resource [data-set]. York: Archaeology Data Service [distributor] https://doi.org/10.5284/1028192

University of Southampton logo

Camulodunum 139

previous amphora type next amphora type

details | characteristics | pictures | drawings | petrology | specimens | bibliography | 3D models

No thin sections available

Campanian 'Black Sand' fabric

Comments

Equivalent to: CAM AM 1 of the National Roman Fabric Reference Collection (Tomber & Dore, 1998: 88)

Visual characteristics

This is especially distinctive in the hand-specimen as the fabric appears to contain much 'black sand' - caused by the presence of dark green augite crystals (Peacock, 1971: Fabric 2). This distinctive fabric has been sourced to the area around the bay of Naples, and is especially associated with the towns of Herculaneum and Pompeii (Peacock, 1977d; see also Williams, 2005). However, one must be careful when dealing with undiagnostic bodysherds since the same fabric is also used for Dressel 1A, Dressel 1B, Dressel 1C, Dressel 2-4 Flat-based and the Campanian almond-rimmed type.

Petrology

Thin sectioning shows frequent subrounded grains of green and colourless augite, together with quartz and sanidine feldspar, and lesser amounts of volcanic rock and glass fragments, brown hornblende, biotite and yellow-brown garnet (Peacock, 1971; 1977d).

 


ADS logo
Data Org logo
University of York logo
alt=