Roman Amphorae: a digital resource

University of Southampton, 2005 (updated 2014)

Data copyright © University of Southampton unless otherwise stated


Arts and Humanities Research Council (AHRC) logo

Primary contact

Dr David Williams
Dept of Archaeology
University of Southampton
Avenue Campus
Highfield
Southampton
SO17 1BJ
England
Tel: 080 593032

Send e-mail enquiry

Resource identifiers

Digital Object Identifiers

Digital Object Identifiers (DOIs) are persistent identifiers which can be used to consistently and accurately reference digital objects and/or content. The DOIs provide a way for the ADS resources to be cited in a similar fashion to traditional scholarly materials. More information on DOIs at the ADS can be found on our help page.

Citing this DOI

The updated Crossref DOI Display guidelines recommend that DOIs should be displayed in the following format:

https://doi.org/10.5284/1028192
Sample Citation for this DOI

University of Southampton (2014) Roman Amphorae: a digital resource [data-set]. York: Archaeology Data Service [distributor] https://doi.org/10.5284/1028192

University of Southampton logo

Augst 35



Rim type - Collar
The rim is noticeably thickened in the form of a collar around the neck of the amphora.
Shoulder type - Rounded
The shoulder is noticeably present, usually supporting the handles, but there is no ridge.
Handles in profile - Long vertical
These handles generaly appear on long-necked amphorae, attaching near the top of the neck progressing vertically downwards to the shoulder.
Handles in section - Ridged
The handle has one or more ridges running down it.
Neck type - Cylindrical
The neck is cylinder-shaped.
Body type - Cylindrical
The body of the amphora is cylinder-shaped, displaying little curvature.
Base type - Spike/tapered
There is a solid spike at the base of the amphora.
Capacity (average)
Unsure
Height
0.00cm
Width
0.00cm
Rim diameter
0.00cm
Fabric
Augst 35 fabric